Model : ANR-100/ANR-150
Description

Operation :
This machine is especially suitable for trimming the flash of large volume oil seal.

  • Auto in-feeding, trimming, out-feeding, and collecting most of the trimmed flash.
  • The vacuum generator will suck the oil seal through the mold during the cutting period.
  • The vacuum gauge automatically checks whether the vacuum is enough or not. If it is not, machine will stop automatically.
  • The in-feeding sensor stops running immediately if there is no seal being fed.
  • There is a counter to monitor the life of Knife, once the machine counts the set number, the machine should stop automatically for changing the knife with an alarm.
  • There are many cutting mode for the user to choose. To cut the inner and outer flash simultaneously.
  • One operator can easily operate many sets of the machine at a time.
  • This machine reaches the highest cutting precision because the central point of the spindle is static.
INQUIRY
Specifications
MODEL ANR-100 ANR-150
Weight (kgs) 430 630
Dimensions (cm) 100(L) × 170(W) × 200(H) 100(L) × 220(W) × 190(H)
Oil seal range (mm) 51-100 61-150
Capacity (pcs/min) 8-10
Spindle speed (rpm, 60Hz) Adjustable
Cutting angle 30°-70°
Number of knives 2
Tooling pad size (mm) ø32 or 79
Knife blade size (mm) 3×3 or 3×1.8 or 5×1.8
In-feeding way Conveyor Index table, 8 stations
Out-feeding way Conveyor Conveyor or Index table
Motor 1HP
Inverter 1HP
Controller PLC + color HMI
Back
Next