Model : NRC-200 / NRC-300
Description

Operation :
This machine is used for cutting the flash of the metal case oil seal.

  • Manual feed and auto trim.
  • The #25 collet chuck grabs the oil seal to cut the flash.
  • There are many cutting mode for the user to choose. To cut the inner and outer flash simultaneously.
  • Right cutting angle is 0° - 90°.
INQUIRY
Specifications
MODEL NRC-200 NRC-300
Weight (kgs) 280 350
Dimensions (cm) 80(L) × 90(W) × 190(H) 90(L) × 100(W)× 190(H)
Collet chuck type #25 #45
Cutting range (mm) O.D. 10 -210 O.D. 80 -300
Spindle speed (rpm) 2800, 1700, 1000 Adjustable
Capacity (pcs/min)  15-25 (Approx.)
Right cutting angle 0°-90°
Cutting speed 2 stages, adjustable
Number of knives 2
Knife blade size (mm) 3×3 or 3×1.8 or 5×1.8
Motor 1HP 2 HP
Brake 2.0 kgfm clutch brake 4.0 kgfm clutch brake
Inverter Nil 2HP
Controller PLC
Video
Prev
Back
Next