- Products
- Oil Seal and Rubber Parts Processing Machine
- Valve Stem Seal Trimming and Spring Loading Machine
- Linear Type Valve Stem Seal Trimming and Spring Loading Machine
Model : ATAS-20-V
Description
Operation :
This machine is suitable to cut the flash and load the spring with high volume valve stem seals in the production line.
- Bowl feeder vibrates the seals to appropriate location.
- The vacuum generator sucks the oil seal to precisely fit it on the central point of the mold on the spindle.
- Able to cut the head and flash simultaneously.
- Magnet rotator feeds the spring to appropriate location.
- The tooling is pulled fast by the air cylinder to combine the oil seal with the spring.
- It will check if the spring is being correctly loaded by metal probe.
- The machine sorts the parts for good parts and defects.
- At the end there must be a counter to count the good seals, after the machine counts the set number the machine will stop with an alarm.
- For each stroke of knife there should be a counter to monitor the life of Knife, after the machine counts the set number, the machine should stop automatically for changing the knife with an alarm.
- This machine reaches the highest cutting precision because the central point of the spindle is static.
Specifications
MODEL | ATAS-20-V |
---|---|
Weight (kgs) | 560 |
Dimensions (cm) | 95(L)X190(W)×190(H) |
Oil Seal Range (mm) | 8-20 |
Capacity (pcs/min) | 7-12 (Approx.) |
Spindle Speed (rpm, 60Hz) | 2800 |
Cutting Angle | 30° - 70° |
Servo knife | Option |
Number of Cutters | 2 |
Tooling pad size (mm) | φ 32 or φ 79 |
Cutter size (mm) | 3×3 or 3×1.8 or 5×1.8 |
Spring range (mm) | Max. 32 |
Size of spring feeder(mm) | 135 (Magnet rotator) |
Size of seal feeder (mm) | 400 (Bowl feeder) |
Spindle Motor | 1/4HP |
Controller | PLC + HMI + mechanical probe |