Model : ANR-40-S
Description

The machine attaches with the CNC controller to automatically cut multi flashes of the circle rubber parts at a time.

  • Auto load, trim, and unload the seal.
  • The vacuum generator will suck the oil seal through the mold during the cutting period to get the best cutting precision. 
  • There are many cutting mode for the user to choose. To cut multi flashes at a time.
  • The operator can easily control the cutting approaching speed and cutting distance on touch screen to reach the best cutting quality.
  • Cutting position saves in the memory. No need to manually fine tune cutting position. Easily change the oil seal from one to one.
  • The sensor will detect if the tip of knife is wear or broken.
  • At the end there must be a counter to count the good seals, after the machine counts the set number the machine will stop with an alarm.
  • For each stroke of knife there should be a counter to monitor the life of Knife, after the machine counts the set number, the machine should stop automatically for changing the knife with an alarm. 
INQUIRY
Specifications
MODEL ANR-40-S ANR-40-S-I
Cutting tange (mm) O.D. 20 -40
Spindle totation speed(rpm) Adjustable
Tooling pad size(mm) φ 25 and φ 79
Left cutting angle 30° - 70°
Right cutting angle 0° - 90°
Number of cutting assembly 2
Number of motor-driven axis 2 (axis Z)
Knife blade size (mm) 3×3 or 3×1.8 or 5×1.8
Spindle TIR (mm) 0.02(max)
Cutting accuracy (mm) 0.02(max)
CCD pixels Nil 1280 X 1024
Motor 1HP
Controller PLC and color HMI
Prev
Back
Next